圓鋼管內和外壁拋噴丸清理工作機
◆類產品優點 Product features
塑料管漆層拋丸深度清理機選應用在大、中、中大型塑料管、瓶的漆層補救和加強、零件重新拖動、重新勻速行走,零件的暖機時速可可根據零件的的要求使用即時設定,可設計的成單管、雙管、3管、4管、變種后可整理玄幻管道管件、儲罐,所有運輸罐企業公司小車等。
The outer steel wall of shot cleaning machine is used in large, medium and small steel tube, the cylinder's surface treatment and strengthening, workpiece rotating, automatic walk, the operation speed according to the requirements can be adjusted, can design the single pipe, double tube, 3, 4 pipe, tube variation can be clean up after large-scale pipe, oil tank, chemical storage tank railway vehicles and so on.
◆重點技術應用基本參數 Main technical parameters
清理工作鍍鋅鋼管厚度 Clean steel pipe size |
Φ300×5000mm |
拋丸器使用量 The number of shot peening machie |
2臺 |
輥道正常運行加速度 Roller speed |
1-5m/min |
拋丸器電機功率 Shot peening machie power |
11kw×2 |
彈丸孔徑 Projectile diameter |
Φ0.8-Φ1.2mm |
拋丸量 The number of shot peening |
250kg/min×2 |
再次彈丸放進量 The first projectile into amount |
800kg |
風扇葉片半徑 Impellerdiameter |
Φ250mm |
進(出)料輥道長 Length of material into(out) the roller |
5000mm |
槳葉轉速 Impeller speed |
2930r/min |
輥距 Roller dimension |
400mm |
拋射流速 Aerosol propellant speed |
60-70m/s |
承受力自重 Load weight |
30kg/m |
改善機熱效率 Hoist machine power |
3kw |
擺線低速機公率 Cycloidal reducer power |
2.2kw |
提升自己量 Ascension of |
30/h |
過濾裝置布袋條數 The number of filter bag |
36條 |
剝離 量 Separation of |
30t/h |
過濾器布袋規格型號 Specification of filter bag |
Φ120×5000mm |
橫向旋螺耗油率Longitudinal spiral power |
3kw |
凈化處理功率 Processing air volume |
9800m3/h |
輸料量 Throughput |
30t/h |
除灰羅茨風機電率 Dust electromotor power |
5.5kw |
總電機功率 Total power |
37kw以上 |
振打調速電機馬力 Vibration motor power |
0.75kw |
設施設備形壯規格尺寸 Shape dimension |
15000×4600×5000mm |