Q32系列的輪式拋丸深度清理機

◆成品優勢特點 Product features

本輪式噴砂機時候多茶葉品類，大中自定義工作鏜孔的表面層防銹處理或拋丸加強，清洗鏜孔務必是不是怕激發的單重在150kg以上的鑄件及熱操作件，機械既可單機版運行，又可配線運行. 都是精密鑄造自動化設備依據。

自主：將鑄件倒入硅膠履帶滾軸中，操作步驟工人按下面公式“行駛”控制鍵，拋丸室門手動取消，拋丸清洗逐漸開始，履帶往前行駛，鑄件連續不斷的做翻滾，超強力拋丸器將拋丸迅速拋射入正翻滾的鑄件面上上，鑄件可是完全更加均勻地的清洗。鋼丸能夠 履帶到的溜孔流通量錐齒輪減速機傳送帶機，再將鋼丸傳送帶到斗式加強機，經斗式加強機加強到脫離器，被脫離后儲備存用。拋丸完后，拋丸室門自主重置，履帶換向，將鑄件卸出。

手動：這手機是利用高速公路傾動的風輪將彈丸拋向履帶內陸續轉動的零部件上，若想可達清洗零部件的目的意義。它適合于各業業中的小形鑄件、鍛件、冷沖壓件、蝸輪、板彈簧等件的清砂、去銹、去氧化物皮和表面層強化木紋地板。機器是合理國產外技術水平，制作開拓的新車輛，有的是種清洗效果好、節構密集、燥音小、電氣成套性好的清洗裝備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆物料亮點 Product features

1.該機通過了懸臂離心法式拋丸器，具備有動用保修期長和組成簡單的等特征 。

2.適用BE型分離器，更具好的分離視覺效果和生孩子率，對增強樹葉有主動的用。

3.運用袋式濾塵器，塵土污染物密度達不到一個國家規程的基準，大山河提升了運小說作家的勞動力條件。

4.用于耐磨橡膠材料橡膠材料履帶，可減輕了對工件產品的汽車碰撞及受損的情況，調低了系統的躁音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆用于規模 Applicable scope

      壓鑄件、精密機械模具鑄件、精密機械模具鍛件等的外理、光飾。取除熱外理件、鑄件、鍛件的外表面防氧化皮。壓簧的淬煉。加固件除銹設備和前外理。

1、對比華燁90年末的拋丸機廠家進行產的化制造技術。

2、適用直聯強力拋丸器，傳播有效率好，拋丸量大。

3、風選分開出來器、丸砂分開出來率大于等于99%。

4、彈丸覆蓋住光滑，無拋丸方位。

5、耐磨橡膠件選用時間長，換個很快。

6、裝置低嘈音程序運行。

7、電適用繼電（或PLC）調節，調節柜、聲光報警器報警器，PC用三菱PLC加盟名牌，其主要原功率器件用歐姆龍全資加盟名牌進行操作簡約、正規。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆包括新技術基本參數 Main technical parameters